Zmodo Weatherproof Night Vision PTZ 1/4-Inch 420TVL 22x Zoom Retail Camera CM-Z2212GY (Electronics) is the first Weatherproof Night Vision PTZ camera for the price. It is fast in setting and it works great. The night vision is also excellent. It is very clear. The image is sharp and clear in colors. It is as good as $1500 versions camera price. The money you will not find a better outdoor PTZ camera.

There are things you need to know before you consider to buy. Firstly, Why buy the Weatherproof Night Vision PTZ camera Articles it need to use the 3-5 amp power supply included with the camera. This Weatherproof Night Vision PTZ camera pulls more amps than the ‘normal’ CCTV cameras. If you have a 12v system and the existing cameras only pull 1/2 -1 amp each. Your Altronix power supply box which had 4 other cameras attached with it. It has rated 5 amps total that was not enough. You need to keep the Zmodo Weatherproof Night Vision PTZ 1/4-Inch 420TVL 22x Zoom Retail Camera on it’s own power supply. Secondly, your existing video/power cable from the old camera in the attic was insufficient. That cable is a 100 foot premade power/video cable. It could not handle the 3-5 amp load to this camera required. You have to buy a new 120 ft premade cable rated for the higher amps off Ebay. This was consulted with the seller who knows this stuff. He suggested what we needed for.

RS485 is the control for the pan-tilt-zoom. You can use existing connecters if your premade cable has them. You also can run 20 gauge wire and connect it to the back of the DVR. The DVR is Q-See and there is only 1 place 여긴어때 사이트 to connect RS485. Multiple Weatherproof Night Vision PTZ ‘s can be daisy-chained to that same connection.You do not touch the dips as the camera is the only Weatherproof Night Vision PTZ camera in this system.

The defaults were Pelco-D, 2400 Baud, databit=8, stopbit=1, parity=none, address=1. The ‘address’ set on the dips on the camera must match the ‘address’ setting on the DVR for that camera. You have an 8 camera DVR. You connect the video cable for this camera to channel 4. This insures the ‘address’ setting is correct (‘001’) under ‘channel 4’ in the Weatherproof Night Vision PTZ camera setup on the Weatherproof Night Vision PTZ camera . Make sure no other channels have ‘001’ for the address or the RS485 will be confused. Each PTZ camera needs to have it’s own unique ‘address’. You post a picture of ‘channel 4’ settings.

Points have to take notes. When the Weatherproof Night Vision PTZ